March 31st, 2017. Bathroom Designs, Simple Tips and Tricks for Installing the Three-Way Vanity Mirror Perfectly.
a three-way vanity mirror is an ordinary mirror containing three parts; one is located in the middle and the other two sides are angled to let the dimensional view when you are standing in front of it. This type of mirror is generally used by women for applying makeup or trying on clothes. The great thing about this mirror is that they are amazingly adjustable. Moreover, they can enhance the beauty of your bathroom or bedroom decoration. Installing this three-way vanity mirror is more likely similar to that of the standard mirror. All you need to do in simply place the center part for the only provision.
Support beam in your room by using the stud finder. The importance of having support beam is to hold the weight of the mirror perfectly so that it can be attached strongly to the wall. consider maximizing two support beams for larger or wider mirrors.
The next thing to do in installing the three-way vanity mirror perfectly is by making a tiny mark on the approximate height of your wall. make sure you put the mark exactly at the beam’s location which you want to hang the mirror. Before applying the mark, you need to hold the mirror first in order to get an idea on the height of the mirror. It will be better if you ha a companion beside you since you can ask him to write the mark while you are holding the mirror.
Measuring the mirror’s center section is the next thing you need to do to install the three-way vanity mirror. Place a mounting hardware in every corner of the mirror at approximately 1 inch into the inside. By doing so, you can provide the mirror with the right stability that can support the movement and the weight of the side panel.
At the position where you mark the mirror, make a straight line by using a level. There is about 4 or 6 inches long for three-way vanity mirror installed in the center of the room. Meanwhile, for the mirror with the larger size, you need to create some lines across the wall where the mark is being drawn. If it is possible, you can also create lines at the same spot in which you marked the studs.
Lastly, hang the three-way vanity mirror on the hooks. Place the mirror at a correct center and level and don’t forget to customize the side panel mirrors to receive the required angle.